Full-surface adhesive plaster and window sealing tape for exterior use
- Saves time: the joint is immediately resistant to driving rain and can be subjected to loading
- Can be plastered over directly: defined transition between window and/or wind sealing and plaster
- Reliable joints: waterproof SOLID adhesive has extremely strong adhesion on mineral subsurfaces too
- Proven resistance to driving rain up to 2400 Pa
- Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim (DE)
Areas of Application
For exterior windtight joints that are resistant to driving rain between windows or doors and adjacent building components made of wood or mineral subsurfaces such as concrete and masonry, full-surface adhesion.
The modified waterproof SOLID adhesive ensures quick and permanent adhesion to the subsurface.
The stuck joint is immediately windproof and can be subjected to loading. The fleece can simply be plastered over in accordance with the application guide.
|Width||split release film|
|80 mm||20/60 mm|
|100 mm||20/40/40 mm|
|150 mm||20/70/60 mm|
|200 mm||20/100/80 mm|
Photo gallery - Installation: 1. Before the window is installed
Photo gallery - Installation: 2. Window already installed
The bonds should not be subjected to tensile strain.
Press firmly to secure the adhesive tapes in place. Ensure that there is sufficient resistance pressure.
Seals that are windproof and resistant to driving rain can only be achieved if the sealing tape is installed free of folds and breaks.
When plastering, please observe the recommendations of the plaster manufacturer for non-absorbent subsurfaces. A bonding course may be necessary.
Clean subsurfaces before sticking.
Uneven mineral subsurfaces may need to be levelled with a smooth finish.
Adhesion to frozen surfaces is not possible. There must be no water-repellent substances (e.g. grease or silicone) on materials to be bonded.
The width of the adhesive tape that is to be plastered over should generally not exceed 60 mm (2 3/8") or 50% of the soffit area. Detailed recommendations can be obtained from the relevant plaster producer.
Subsurfaces must be sufficiently dry and stable.
Permanent adhesion is achieved on all pro clima interior membranes and on other vapour retarder and airtight membranes (e.g. those made of PE, PA, PP and aluminium). Adhesion can be carried out on planed and painted wood, hard plastics, hard wood-based panels (chipboard, OSB and plywood panels), metal (e.g. pipes, windows etc.) and on mineral subsurfaces such as concrete and masonry.
The best results in terms of structural stability are achieved on high-quality subsurfaces.
It is your responsibility to check the suitability of the subsurface; adhesion tests are recommended in certain cases.
Pretreatment with TESCON PRIMER is recommended in the case of subsurfaces with insufficient stability.