Liquid sealants
Spraying instead of sticking - The AEROSANA VISCONN system
Compressed air spraying: AEROSANA VISCONN is now also available in foil cartridges, with or without fibre reinforcement. Simply insert the cartridge into the AEROFIXX application gun, connect to the compressed air and you’re ready to start spraying!
Airless spraying
Timber and masonry structures. Surfaces, corners, edges and detail features. Roofs, walls, ceilings and floors. Interior and exterior – our sprayable AEROSANA VISCONN sealant is the solution for a wide range of applications!
Quick and easy
- Simply spray it on: extremely quick application
- Particularly on transitions and detail features with lots of edges and corners
- Reliable in the case of relative motion between building components: remains permanently elastic
- Sticks to all standard construction surfaces, can also be used as a bonding course
- Can be plastered, painted and stuck over
- Covers cracks and joints
- No mixing necessary: ready-to-use
AEROSANA sprayable airtightness sealant – system products
As varied as your construction sites are
Seal anchors in an airtight manner
on timber frame structures and solid timber structures
Window joints
all around the window on the inside and outside, incl. sub-sill flashing. Passive House certified and IFT tested
At inaccessible locations and with difficult geometries
and with different materials - even with poor adhesion of adhesive tapes
Uneven subsurfaces, material transitions
spray on and everything is sealed!
Joints
on masonry, concrete and timber structures
Joints between panel-form materials
simply fill with AEROSANA VISCONN and spray over to seal joints of up to 3 mm (1 1/8") in width.
For larger joints or holes
simply apply AEROSANA FLEECE and paint over it at pipe feed-throughs, for example.
Roof refurbishment from the outside
e.g. quick sealing of collar tie ends to the airtightness layer
Joints and cracks
of up to 20 mm (7/8") in width can be painted over with AEROSANA VISCONN FIBRE.
Apply a primer
to all standard construction surfaces as a bonding course
Surfaces
can be sealed extremely quickly, e.g. bare masonry or porous panel-form materials.
1. Basic handling
2. Eave refurbishment
3. Joints at double collar ties
4. Window sealing
More systems for building sealing
AEROFIXX technical support videos
Here you will find tips, support and troubleshooting information on how to work with AEROFIXX.
