KAFLEX mono
Installation steps
1. Pull the cable through and align
Pull the cable through the pre-punched hole in the EPDM, guide the grommet as far as the subsurface and align. Suitable for cables with a diameter of 4.8 - 12 mm (3/16”-1/2”).
1. Pull the cable through and align
Pull the cable through the pre-punched hole in the EPDM, guide the grommet as far as the subsurface and align. Suitable for cables with a diameter of 4.8 - 12 mm (3/16”-1/2”).
2. Remove the release film
Gradually remove the release film.
2. Remove the release film
Gradually remove the release film.
3. Stick the grommet and rub it firmly to secure the adhesive bond
Stick the grommet to the subsurface and rub it firmly to secure the adhesive bond. Ensure that there is sufficient resistance pressure. This work can be carried out more efficiently and in a manner that is kinder to your hands by using the pro clima PRESSFIX application tool.
3. Stick the grommet and rub it firmly to secure the adhesive bond
Stick the grommet to the subsurface and rub it firmly to secure the adhesive bond. Ensure that there is sufficient resistance pressure. This work can be carried out more efficiently and in a manner that is kinder to your hands by using the pro clima PRESSFIX application tool.
Also available as KAFLEX duo
KAFLEX duo is pre-fabricated with two holes in the EPDM for quick and reliable penetrations with two cables of diameters of 4.8 - 12 mm (3/16”-1/2”). Use of the KAFLEX cable loom grommet is recommended if a number of cables are to be reliably integrated into the airtightness layer.
Also available as KAFLEX duo
KAFLEX duo is pre-fabricated with two holes in the EPDM for quick and reliable penetrations with two cables of diameters of 4.8 - 12 mm (3/16”-1/2”). Use of the KAFLEX cable loom grommet is recommended if a number of cables are to be reliably integrated into the airtightness layer.
