ROFLEX 20
Installation steps
1. Pull pipe/cable through
Clean the subsurface, then pull the grommet over the pipe or cable.
1. Pull pipe/cable through
Clean the subsurface, then pull the grommet over the pipe or cable.
2. Remove the release paper
Remove the release paper around the pipe/cable feed-through.
2. Remove the release paper
Remove the release paper around the pipe/cable feed-through.
3. Stick the grommet
Press the grommet into place so that it rests flat on the subsurface, stick and rub firmly to secure the adhesive bond. The PRESSFIX application tool is ideal for this.
You’re finished!
3. Stick the grommet
Press the grommet into place so that it rests flat on the subsurface, stick and rub firmly to secure the adhesive bond. The PRESSFIX application tool is ideal for this.
You’re finished!