CONTEGA FIDEN EXO
Installation steps: 2. Window already installed
1. Masonry structures
CONTEGA FIDEN EXO is to be applied subsequently to an already mounted window.
1. Masonry structures
CONTEGA FIDEN EXO is to be applied subsequently to an already mounted window.
2. Roll off a length of CONTEGA FIDEN EXO
... and cut off the overcompressed start of the tape (approx. 2 cm (3/4")). Using a scraper knife, carefully insert the tape into the joint, parallel to the edge. Always install CONTEGA FIDEN EXO with a recess of 1-2 mm (around 1/16") to stop it protruding.
2. Roll off a length of CONTEGA FIDEN EXO
... and cut off the overcompressed start of the tape (approx. 2 cm (3/4")). Using a scraper knife, carefully insert the tape into the joint, parallel to the edge. Always install CONTEGA FIDEN EXO with a recess of 1-2 mm (around 1/16") to stop it protruding.