CONTEGA SOLIDO SL
Installation steps: Window already installed
1. Window in masonry structure
CONTEGA SOLIDO SL is to be applied subsequently to an already mounted window.
1. Window in masonry structure
CONTEGA SOLIDO SL is to be applied subsequently to an already mounted window.
5. Stick to the reveal
Gradually remove the second (wide) release film strip from the smooth membrane side. Start sticking to the reveal in the corner area. Stick the excess tape to the adjacent reveal side. Stick the tape as far as the next corner area. Stick the excess tape to the adjacent reveal side.
5. Stick to the reveal
Gradually remove the second (wide) release film strip from the smooth membrane side. Start sticking to the reveal in the corner area. Stick the excess tape to the adjacent reveal side. Stick the tape as far as the next corner area. Stick the excess tape to the adjacent reveal side.
6. Rub to secure the adhesive bond
Rub the tape firmly into place on the frame and reveal using the PRESSFIX application tool.
Tip: The width of the application tool can be adapted as needed.
6. Rub to secure the adhesive bond
Rub the tape firmly into place on the frame and reveal using the PRESSFIX application tool.
Tip: The width of the application tool can be adapted as needed.