Highly per­meable 3-ply wall lining membrane with monolithic TEEE membrane, suitable for closed façades with 2 in­teg­rated self-ad­hes­ive sec­tions

 

Advantages

  • Strong, 3-ply structure for protecting the wall structure
  • Protective function as a result of non-porous functional membrane that actively manages moisture
  • High nail tear resistance
  • For use behind closed façades
  • 3 months of outdoor exposure
  • Quick and re­li­able ad­he­sion as a res­ult of in­teg­rated con­nect self-ad­hes­ive zones along the length of the mem­brane
 

Application

For making walls externally windproof. Installation on boarding, wood-based panels and all insulation mats and boards.

Technical specs / Forms of delivery

  Material
Protective and covering fleece Polypropylene microfibre
Membrane monolithic TEEE
Attribute Value Norm
Colour black
Surface weight 100 ±5 g/m² ; 0.33 ±0.02 oz/ft² EN 1849-2
Thickness 0.45 ±0.05 mm ; 18 ±2 mils EN 1849-2
Water vapor resistance factor µ 110 EN ISO 12572
sd-value 0.05 ±0.02 m EN ISO 12572
g-value 0.25 ±0.1 MN·s/g
Vapor permeance ASTM E 96
Reaction to fire E EN 13501-1
Exposure time 3 months
Water column 10 000 mm ; 32' 10" EN 20811
Water resistance non-aged/aged* W1 / W1 EN 1928
Tensile strength MD/CD 210 ±20 N/5 cm / 140 ±20 N/5 cm ; 24 ±2 lb/in / 16 ±2 lb/in EN 13859-2 (A)
Tensile strength MD/CD aged* 190 ±20 N/5 cm / 120 ±20 N/5 cm ; 22 ±2 lb/in / 14 ±2 lb/in EN 13859-2 (A)
Elongation MD/CD 90 ±10 % / 90 ±10 % EN 13859-2 (A)
Elongation MD/CD aged* 70 ±10 % / 70 ±10 % EN 13859-2 (A)
Nail tear resistance MD/CD 110 ±20 N / 140 ±20 N ; 25 ±4 lbf / 31 ±4 lbf EN 13859-2 (B)
*) Artificial ageing by long term passed EN 1297 / EN 1296
Flexibility at low temperature -40 °C ; -40 °F EN 1109
Temperature resistance permanent -40 °C to 100 °C ; -40 °F to 212 °F
Thermal conductivity 0.17 W/(m·K) ; 1.18 BTU·in/(h·ft²·F)
CE labelling available EN 13859-2

Forms of delivery

Art. no. GTIN Length Width Contents Weight Sales unit Container
1: Profi-VE nicht im Anbruch lieferbar

Installation instructions

General conditions

SOLITEX FRONTA WA membranes are to be installed horizontally in a taut manner with no sagging.

The membrane must not be secured in areas where water collectively drains off.

The membrane can be used behind closed facades with at least 20 mm (1") of rear ventilation.

Additional measures during the building phase (e.g. covering with tarpaulin) should be taken in the case of occupied buildings or buildings that need particular protection. Covering with tarpaulin should also be considered in the case of extended interruptions to work.

System core components

SOLITEX FRONTA WA connect

SOLITEX FRONTA WA connect

Highly per­meable 3-ply wall lining membrane with monolithic TEEE membrane, suitable for closed façades with 2 in­teg­rated self-ad­hes­ive sec­tions

SOLITEX FRONTA WA

SOLITEX FRONTA WA

Highly per­meable 3-ply wall lining membrane with monolithic TEEE membrane, suitable for closed façades

ORCON F

ORCON F

Multi-purpose joint adhesive glue

ORCON MULTIBOND

ORCON MULTIBOND

Rolls of joint adhesive for interior and exterior use

TESCON VANA

TESCON VANA

All-round adhesive tape with fleece backing

Additional solutions

TESCON PROFECT

TESCON PROFECT

Pre-folded corner adhesive tape

CONTEGA IQ

CONTEGA IQ

Intelligent plaster sealing tape for indoor and outdoor use

TESCON PRIMER RP

TESCON PRIMER RP

Solvent-free primer, no drying required

KAFLEX mono

KAFLEX mono

Sealing grommets for 1 cable, Ø 4.8 - 12 mm (3/16”-1/2”)

ROFLEX 100

ROFLEX 100

Sealing grommets for pipes Ø 100 - 120 mm (4”-4.75”)